Applied-engineering Vulcan Instrukcja Użytkownika Strona 13
- Strona / 62
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
10) ReInstall Any Cards Removed
Replace any cards you have removed for the installation
following those cards’ installation instructions.
• WARNING! IF YOU HAVE A CARD IN SLOT 1, use
the insulator card (2” x 6”) included with the Vulcan
package. Applied Engineering will not be responsible
for damage to any other products so be careful when
reinstalling your cards.
11) Close Computer
Replace the lid by sliding the front of the lid in first, lowering the
back edge into place and then pushing gently and firmly on the
back corners of the lid until it pops into place.
12) Plug In External Power Cord
This is the same cord as your original power supply used.
Connect it to the back of the Vulcan and then plug it into the
wall socket.
13) Boot Computer and Set Slots
You must set the slot containing the controller card to “Your
Card” under Slots option of the Control Panel. Refer to your IIGS
owner’s manual for more information on setting the slot.
Slot 7 Exception (Pseudo-Slotting)
If you want the card to appear to be in slot 7 even though
it’s installed into another slot (as mentioned earlier) you’ll
need to set your slots as follows:
1) Leave the slot in which the controller card is
installed set to that slot’s function (i.e. not “Your
Card”)
2) Set slot 7 to “Your Card.”
• Note: Make sure that you’ve set the switches on
the card to the proper position.
14) Set to Boot from the Vulcan
The Vulcan is preformatted and ready to boot into GS/OS. If you
want to boot from the Vulcan, set the Startup Slot under the
Slots option to the slot that your Vulcan is in. (If you’re pseudo-
slotting, set Startup Slot to 7.)
Hardware installation is complete. Congratulations!
6 Vulcan
- Table Of Contents 2
- Getting Started 6
- The Vulcan's Fan 7
- The Power Supply 7
- IIGS Installation 8
- Unplug Internal Cord 9
- Pull Back Tab 9
- 4) Check Voltage Setting 9
- 5) Insert Vulcan 10
- Default Switch Setting 11
- What Now? 14
- 8 Vulcan 15
- //e and ][ Plus Installation 16
- 11)Insert Card Into Slot 21
- 21
- 16 Vulcan 23
- The Partition Manager 24
- The MODIFY Mode 25
- and K keys) to select 25
- “J” or left arrow 26
- BACK UP! 27
- Sizing the Partition 28
- Turning Partitions On or Off 29
- Selecting the Boot Partition 31
- Canceling/Saving Changes 32
- Formatting 33
- Final Check 34
- Quitting 34
- 28 Vulcon 35
- CHAPTER FOUR 36
- Patched DOS 3.3 Notes 37
- Volume Sizes 37
- The Rest of FID 39
- Other DOS 3.3 Goodies 41
- Backing Up the Vulcan 42
- Suggested Backup Schedule 43
- Before You Back Up 43
- Running Backup II 43
- Backup Entire Hard Disk 43
- Backup Modified Files 45
- Listing Files 46
- Restore Individual Files 47
- (/VULCAN1 49
- C - - Hardware 50
- 44 Vulcan 51
- Trouble Shooting 52
- APPENDIX B 53
- APPENDIX C 54
- Set Boot Partition 55
- Write Protect Partition 55
- Park Heads 55
- About Vulcan 56
- Hardware 57
- Remote Light Jack 58
- A Brief ProDOS Tutorial 59
- Pathname 60
- System Files 60
- Additional Resources 61
- Getting Help 62
Powiązane produkty i podręczniki dla Sprzęt komputerowy Applied-engineering Vulcan
(8 strony)REX RF 320 manuels
Manuels d'utilisation et guides de l'utilisateur pour Réfrigérateurs-congélateurs REX RF 320.
Nous fournissons des manuels en pdf 1 REX RF 320 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji